Question
I sometimes (about 5 times per year) decide to shoot a panorama, just for me, with no intentions to sell or use the photo outside my family and close relatives.
Currently I use my Pentax DAL 18-55 lens and free Hugin software for it but I plan to buy Samyang 8 mm fisheye. I made few panoramas using my monopod (better than to shoot "from hand"). However I read something about things like nodal point etc. and found out that the head mount should be located not on the bottom of the body but near the rear lens element.
I know of things like Nodal Ninja etc., but it is too expensive and I do not plan to shoot panoramas often. When I would stick with my monopod and lets say with the Samyang fisheye, than some simple small and light aluminum profile with two holes, tripod nut and screw would make it possible to mount the camera and rotate it around nodal point - is it right? Does it make sense to build such gadget or do you think I will have similar results using standard mount?
Answer
Yes, you can do it. I know some people that have, one friend made one out of wood because it was easier than metal. If you intend to do it for your 8mm, it will be relatively easy since there is ONE fixed nodal point, contrarily to the zoom.
You said you do not do panoramas often but do you do Macro? If so, a macro rail is sufficient to work for a DSLR with a short lens and it will work for the 8mm and your zoom at all focal-lengths.
Included in my How To Make a Panorama tutorial are instructions with an example on how to find the nodal point (technically entrance pupil).
Check more discussion of this question.
No comments:
Post a Comment