Why do two cameras with different resolution but both with 2/3″ sensors, and same mount and lens, give a different view?

Question

In testing, I have a circle on a piece of paper. I need to mount a camera at a fixed distance so that the circle just captures the top and bottom of that circle.

Im testing this because I need to make a case for a camera that I do not have. But I do have 2 other cameras with the same 2/3in sensor size. So I figured I would test with them to take the measurements for the case.

When setting this up, one camera ends up being .5in closer than the other camera. I tested it with both a 12mm and a 16mm lens.

Both cameras are 2/3in sensors with a c-mount. I am literally using the same lenses for the measurements, just moving it to the other camera.

One camera is a 5mp sensor, the other is a 3.5Mp sensor. But I figured the sensor size being the same this wouldn't be an issue. Also the Flange focal distance of a c-mount lens is fixed too.

Any ideas on what could be causing this?

Extra Information

• The cameras are industrial video cameras made by allied vision. The prosillica GX 1920 and the manta 504
• I do not think this can be a viewfinder issue because I am reading the raw sensor output for the testing

Asked by Adam Meyer

Answer

The two sensors are slightly different sizes. It is possible that sensor position varies but that is likely to create focussing problems, a sensor plane shift of half an inch would probably lose you infinity focus.

But by far the most probable explanation is differing sensor sizes which give you a different field of view, which you have to compensate by moving one of the cameras.

Lots of camera specifications, such as sensor size, focal length, even the number of megapixels are rounded for convenience and are hence not accurate enough to base other measurements on.

Answered by Matt Grum

Check more discussion of this question.